Process Flow:
Manually put the lens carrier ring into the magazine in the way of a full tray, and the machine automatically completes the following actions:Vacuum suck up the lower lens➔Vacuum suck up the upper lens➔Visual positioning➔Dispensing➔Attaching upper lens➔Centering➔UV precuring➔Receiving

Product Feature:
1.High parallelism; high coaxiality, high yield;
2.Imported dispensing controller ensures accurate and stable adhesive output control;
3.Gate can be identified with visual positioning and any bonding angle could be set;
4.L.oading and unloading could be achieved by the combination of magazine and dual trays to prolong materia replacement interval;
5.The receiving tray can be directly used as the loading tray of the lower lens to simplify turnover and improve production efficiency;
6.5 products are bonded at the same time to improve production efficiency;
7.Interlocking or non-interlocking structures both can be stably bonded.

 

Equipment Model	PPNH-01	PPNH-04
Magazine Tray Size	235mm*100mm	249mm*126mm
Magazine Layer Qty.	5 Layers	8 Layers
Applicable Lens OD	Φ3mm～Φ15mm
UPH	300～360 (Depending on Adhesive Rubbing Process and Adhesive UV Curing Process Time)	500～600 (Depending on Adhesive Rubbing Process and Adhesive UV Curing Process Time)
Bonding Parallelism	≤0.003mm	≤0.002mm
Bonding Coaxiality	≤0.003mm
Variation of Shape	≤0.3um
Pressure Range	3N～20N
Bonding Angle	Set Angle Freely，Error≤±5°
Overall Dimension	1150*1150*1760mm	1300*1050*1760mm
Equipment Weight	660KG	1050KG
Rated Power	1.75KW
Power Supply Requirement	AC220V/6A/50HZ
Air Pressure Requirement	0.4MPa～0.6MPa
Environment Temperature	10℃～30℃
Environment Humidity	≤80% No Condensation