Process Flow：
Manual loading→set process parameter→activate the equipment→manual  unloading after the test

Product Feature：
1.Precise Control: The temperature control range is adjustable from -70℃ to 150℃ with a precision of ±1℃; the humidity control range is adjustable from 10% to 98%RH with a precision of ±3%RH.
2.Flexible Adjustment: The circulating fan employs variable frequency control, and the air outlet deflectors can be flexibly adjusted in angle to ensure uniform temperature and humidity distribution.
3.Rapid Temperature Change: The average cooling rate under no-load conditions throughout the entire process is over 2.5℃/min.
4.Safe and Reliable: The piping of the humidification and refrigeration systems is separated from the control circuits to prevent circuit damage caused by potential pipe leakage, thereby enhancing safety.

Equipment Model	HLT-BOX-01	HLT-BOX-02
Loading& Unloading Method	Manual Loading & Unloading
Applicable Product	Applicable to the Reliability and Performance Test Under High and Low Temperature, and High-low Temperature Cyclic Alternative Conditions of New Materials Such as Lens Units, Batteries,Printer Components,Car Seats and Steering Wheels.
Temperature Range	-40℃～150℃	-70℃～150℃
Temperature Resolution	0.1℃
Temperature Fluctuation	≤±0.5℃
Temperature Deviation	≤±2℃
Temperature Uniformity	≤±2℃
Heating Rate	Average Heating Rate Under No-load Condition ≥3℃/min
Cooling Rate	Average Cooling Rate Under No-load Condition ≥2.5℃/min
Humidity Range	10～98%RH
Humidity Resolution	±0.1%RH
Humidity Deviation	≤±3%RH
Humidity  Fluctuation	≤±3%RH
Refrigeration System	Mechanical Compression Single-stage Refrigeration	Mechanical Compression  Binary Cascade Refrigeration
Refrigerant	R404a	R404a/R23
Humidity & Temperature Calibration Value	23℃/50%RH and 95℃/50%RH
Cooling Method	Air Cooling
Controller	Touch Screen +PLC
Protective Device	Protect Against Main Power Overcurrent and Current Leakage,Fan Overcurrent,Compressor Super-high/Super-low Pressure,Compressor Overcurrent,Compressor Discharge Overtemperature, Overtemperature inside Chamber, Phase Loss,Air Duct Extreme Overtemperature (257℃) Fusing (Dry Burn),and Overlimit of Temperature Deviation.
Overall Dimension	900*1500*1950mm	900*1600*1950mm
Equipment Weight	420KG	500KG
Power Supply Requirement	TN-S  AC380V/50HZ/60HZ
Air Pressure Requirement	0.4MPa～0.6MPa
Environment Temperature	10℃～30℃
Environment Humidity	≤80% No Condensation